
                    For smart-home, we pick up the best solutions provided by github life savers.
                    If google brings you here, you are so lucky! These life savers are angels, they have well solved your problems.
                    So do not waste time scrolling the original issue threads just to dig out solutions... 
                    Here you are, you are welcome. Then, go back to work!
                    

Well I worked mine out Color order was just a case of switching the PWM1 and PWM2 because my LED strip is +GRBW 

Tasmota MagicHome LED (ESP-IR-B-v2.3 / ESP8285MOD ESP-M2) not working with tasmota f/w

Hello everyone First of all thank you for this wonderful library I have found it very useful 

Tasmota More effects with leds

Closing issue as there is no feedback Please when you have time tell us if the proposed solution works for you Thanks

Hi 

Tasmota lc technology 2ch relay

@seritos - it seems that the upload to the ftp server did not work for some builds but the actions workflow still finished without error 

Tasmota Upgrade to Tasmota from Shelly mongoose trough SW ( not cable)

Hi All I know this is an old issue This thread came up when I was looking to use Tasmota to control the speed of a 4-pin 12 VDC fan 

Tasmota Alternative PWM implementation for ESP8266 devices

You can try setoption41 40 PROBLEM DESCRIPTION
I have been using the Tasmota version 6.3.0 for about 20 Sonoff Basic's for several years and have not had any worries with the Belkin Wemo emulation

Tasmota Alexa issue

As you are running WITHOUT a relay it is not a sonoff and therefore anything could happen but apparently I seem to have provided some nice features anyhow 

Tasmota multiple switchtopics?

I have been using this on HA for a few weeks now and it works  very nice Hi does someone plan to integrate this into home assistant? 

python miio Integration in home assistant

I did a quick test with this:
miio protocol call 192.168.1.105 get_prop '[run_state,mode,err_state,battary_life,box_type,mop_type,s_time,s_area,suction_grade,water_grade,remember_map,has_map,is_mop,has_newmap]'
and got a response so local api is possible 👍

python miio Support for new vaccum Xiaomi Mijia STYJ02YM

Have you tried turn it off and on again? method worked for me with combination of retry_count=20 in device.py and self._timeout=0.5 timeout=0.5 