
                    For firmware, we pick up the best solutions provided by github life savers.
                    If google brings you here, you are so lucky! These life savers are angels, they have well solved your problems.
                    So do not waste time scrolling the original issue threads just to dig out solutions... 
                    Here you are, you are welcome. Then, go back to work!
                    

Well I worked mine out Color order was just a case of switching the PWM1 and PWM2 because my LED strip is +GRBW 

Tasmota MagicHome LED (ESP-IR-B-v2.3 / ESP8285MOD ESP-M2) not working with tasmota f/w

Hello everyone First of all thank you for this wonderful library I have found it very useful 

Tasmota More effects with leds

Just hit this with a Tevo Tornado with a MKS GEN L board and RRD Full Graphic Smart Controller trying to install Marlin 1.1.8 then 1.1.9 

Marlin Full graphic controller issues under Arduino >1.0.6

To sum up the intended way to do configuration for the En_AUTO_FAN_PIN settings is to just comment out the ones that you want to enable 

Marlin Extruder fan doesn't come on automatically.

I've tried 0 400 0 and 250 250 250 but nothing changes So here I am again 

Marlin Reprap Discount Full Graphics Smart Controller Display is Garbled

Closing issue as there is no feedback Please when you have time tell us if the proposed solution works for you Thanks

Hi 

Tasmota lc technology 2ch relay

@seritos - it seems that the upload to the ftp server did not work for some builds but the actions workflow still finished without error 

Tasmota Upgrade to Tasmota from Shelly mongoose trough SW ( not cable)

Hi All I know this is an old issue This thread came up when I was looking to use Tasmota to control the speed of a 4-pin 12 VDC fan 

Tasmota Alternative PWM implementation for ESP8266 devices

OK It looks as if I have ironed out most of the issues and can put together an evaluation PR 

nodemcu firmware Policy of supporting Lua in ROM

I have actually managed to install RQR24.06_B0030 by myself Here is what i did:

Comment out lines 62-67:



It works flawlessly. 

fwupd Can't update logitech unifying receiver: cannot handle firmware requirement 'not-child'

I'll do the proper PR today or tomorrow Sorry guys but I've been a bit poorly and this has hit my ability to do useful work The committers know the backstory 

nodemcu firmware Upgrade to SDK 3.0 -- update 1

If you just want the command line tool then compilation (and download times) can be sped up 

Heimdall unable to compile from source

@boelle Thank you for reopening it I'm about to close it again but I will update for the benefit of others 

Marlin [BUG] TMC2209 Sensorless homing sensitivity is off

Marlin Firmware to get Creality v4.2.7 boards working perfectly
Steps to help anybody that needs to get this board working ok
Source of this how to: https://github.com/Flawioo/Creality-Ender-3-board-v4.2.7/blob/master/README.md
Visual help: https://youtu.be/OJmE9xwPk1U
Download bugfix from git hub https://github.com/MarlinFirmware/Marlin/archive/bugfix-2.0.x.zip
Download Configuration examples: https://github.com/MarlinFirmware/Configurations/archive/bugfix-2.0.x.zip
In platformio.ini
Change: default_envs = mega2560
To: default_envs = STM32F103RET6_creality
In Configuration.h apply the following settings:

In Configuration_adv.h enable the following:

Compile
In Auto Build Marlin at Visual Studio

Marlin Ender 3 v1 with 4.2.7 board

which firmware version has this

bugfix-1.1.x and bugfix-2.0.x

how can I activate the feature so I can test it? 

Marlin Marlin with power loss and resume

The port is mostly finished Some stuff such as the tray bar integration is still missing but this should be mostly usable Here is a beta build 

GalaxyBudsClient Linux port?

You can try setoption41 40 PROBLEM DESCRIPTION
I have been using the Tasmota version 6.3.0 for about 20 Sonoff Basic's for several years and have not had any worries with the Belkin Wemo emulation

Tasmota Alexa issue

As you are running WITHOUT a relay it is not a sonoff and therefore anything could happen but apparently I seem to have provided some nice features anyhow 

Tasmota multiple switchtopics?

Can we roll back to the version in 2.2.0.0 for the next drop to master giving someone with motivation to fix this time thereafter?

Not a good thing to do 